Thursday, March 6, 2014

Set 535

For first time visitors I recommend this archive for some of my best posts.





3121. 15" long:






















3122. Sent in by someone who would like to find the exact purpose of this device, it's 9-1/4" long when collapsed and has about 1-1/2" of telescopic adjustment. All 3 lenses are Rodenstock 60mm with approximate apertures of f6, f8.5, and f12. The lens plate has about 2-1/2" of thread that it can be adjusted up and down and then locked in place with the screw on it.

Larger image












Larger image




















3123. Around 4-1/2" long:

Larger image
























3124. 3-1/2" long:




























3125. 7-1/4" long:

Larger image

























3126. About 4" long, take a look at Neatorama for more guesses and a chance to win a T-shirt.

Larger image



Larger image















Answers:



3121. This is a precision laboratory resistor or shunt, marked ".1 Ohm 15 Amps", the nameplate reads "The Leeds and Northrup Co., Scientific Instruments, Philadelphia".






















3122. Haven't been able to verify it yet, but this is probably part of an old TV camera:

Larger image












Larger image




















3123. A Chrysler timing belt tension tool, model number KD 3282, it can be seen in use on this page (tool C-4703 in the second drawing).

Larger image
























3124. This is a knob for a steering wheel:




























3125. A Texas York Pecan Nut Sheller:

Larger image




























3126. This is a Sadlak M1A, M14 USGI Combination tool for use on military rifles:

Larger image


Some of its uses:
Tightens or loosens the gas cylinder plug
Tightens or loosens the rear sight knobs
Removes or installs the muzzle stabilizer
Removes or installs the M2 bipod
Acts as a handle for the cleaning kit rod
Disassembles and assembles the bolt
Operates the spindle valve
Pushes cartridges from a stripper clip into the magazine



Larger image












Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.























To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.













Last week's set is seen below, click here to view the entire post.
 photo set534.jpg








More discussion and comments on these photos can be found at the newsgroup rec.puzzles.

6 comments:

  1. 3124: Steering wheel knob? sometimes used as an assistive device, or just because it is cool.

    ReplyDelete
  2. 3123- Is a timing belt tensioning tool. The 'nut' end fits over the tensioner and the weight sets the tension. For older Chrysler fwd cars, IIRC.

    ReplyDelete
  3. 3121 is a Precision Resistance probably used as a Shunt in a Metering Scheme

    3124 I agree - Steering Wheel Spinner Knob

    ReplyDelete
  4. 3124 - also known as a Necker's Knob, not legal in NY in the 50's.

    ReplyDelete
  5. 3121: I agree. Another possible use might be for tuning the circuits on a pre-tube radio.

    ReplyDelete
  6. 3125 - nut cracker
    3126 - Pistol cleaning rod, military

    ReplyDelete