Thursday, August 15, 2013

Set 506

For first time visitors I recommend this archive for some of my best posts.





2947. Approximately 6" long, take a look at Neatorama for more guesses and a chance to win a T-shirt:

Larger image










































2948. 8" long, "as you crank the handle, the 'bit' rotates one full turn, and then retreats one third turn."

Larger image







































2949. 7" long:






































2950. 10" high, 4-1/2" diameter, the number 44 is cast on the bottom:



































2951. 3-3/4" long, sent in by a visitor who would like to find the purpose of this tool, "each side has a different size semi circle but the same size rounded corner at the bottom, one side has '2101' and the other has a symbol with the letters '0' and 'S' in it. It was in a box of very high end tools for a machinist."







Larger image







































2952. Around 30" long:

Larger image






















Answers:



2947. This is an English champagne tap from the early 1900s, after penetrating the cork with the screw, the small knob is rotated to open the valve to fill a glass, the valve can then be closed to keep the remaining champagne fresh.

Larger image




























2948. A valve lapping tool for honing valves to ensure efficient sealing when the valve closes against the seat.

Larger image


You can see a similar one in use at the 4:40 mark in this video:




























2949. A lineman's C clamp:




























2950. A projectile for a large military weapon:
































2951. This is an Omni Spectra bender for .141 inch semi-rigid microwave cable. A modern one can be seen here.







Larger image




























2952. A Tactical C6 Hammer Pry Entry Tool, it was designed by the Swedish Hostage Rescue Team to improve and increase the breaching and entry options used by law enforcement and military agencies.

Larger image















Several updates from previous weeks:


2930. This is probably a beekeeper's section closer for making sectional honey frames, text on the board says "Greene, NY" and "Works", there is some space before the word "Works", so it might have read Lyon Iron Works, which used to be located in Greene:

Larger image














2942. This is a pump oil can that is missing its spout:

















2943. The back of this cast iron knight is a fireplace tools holder that held a poker, shovel, broom, and tongs, originally for use with a coal burning Bilston Knight fire grate.




































Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.























To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.













Last week's set is seen below, click here to view the entire post.

Check out Neatorama for lots of funny T-shirts.







More discussion and comments on these photos can be found at the newsgroup rec.puzzles.

7 comments:

  1. The last one reminds me of:

    http://toolguyd.com/stanley-fubar-forcible-entry-tool-and-fatmax-xtreme-fubar-iii/

    B.

    ReplyDelete
  2. 2948: engine valve lapping tool.

    ReplyDelete
  3. 2949 is an overhead conductor tap, used to "Tap Onto" overhead conductors. Often used for grounding. It would have a cable attached to it and would be attached to the conductor using a Hot Stick.

    2951 is a tubing bender

    ReplyDelete
  4. 2947 is a "Champagne tap"

    http://www.corkscrewsonline.com/corkscrew_guide_champagne_tap.html

    ReplyDelete
  5. 2947 is a Champagne tap:

    http://www.corkscrewsonline.com/corkscrew_guide_champagne_tap.html

    ReplyDelete
  6. 2951: Looks like an unfinished part for a tubing bender. A tubing bender has two handles.

    ReplyDelete
  7. 2952 appears to be a door-breaching tool, similar to a Halligan bar plus a hammer and a rake. Gets public safety into where public safety needs to be.

    ReplyDelete