Thursday, February 17, 2011

Set 376

For first time visitors I recommend this archive for some of my best posts.



2167. 1-1/2" long:


























2168.7" long:


























2169. 6" long, sent in by a visitor who is looking to identify this device that was found in an old machine shop:



























2170. 5-1/4" long, take a look at Neatorama for more guesses on this device and a chance to win a t-shirt:


























2171. 5" long:




























2172. Approximately 16" long:
























Answers:


2167. This is a lock for an old telephone dial, a photo of one locked onto a dial can be seen here, although it should be attached to the first hole, not the last.

Larger image


























2168.A wire wrapping tool that is missing the bit and sleeve, it was used for circuit assembly:

Larger image


This video shows how it is used:























2169. Haven't been able to verify any of these guesses for this device:
-part of a tool grinder
-automatic lube tool holder of some sort
-a somewhat modified air bearing spindle for an end-mill sharpening fixture
-an air infuser to mix with gases


Larger image

























2170. An Alliance 'tenna-rotor', for rotating an outdoor television or ham radio antenna, text on it says "Model No DIR 3; 115 volts 60 cycles AC only 1.5 amps 30 watts; The Alliance MFG Co. Alliance, Ohio, USA". The button is spring returned to the center by a medium strength spring, the two other parts by the arrows are stationary and are used for leverage when moving the button so it can be operated with one hand.

Larger image


























2171. A tool for extracting eyes, stems, and leaves from fruits or vegetables, patent number 757,835:


























2172. These are vintage germination trays for testing corn kernels. Each farmer saved some of the best ears at harvest time for next year's seed. Up to 10 kernels were removed from each ear and along with a damp piece of cloth one kernel was placed into each of the small pockets (notice 10 pockets per board). These kernels were kept damp and warm until they germinated. Probably any ear that had less than 90% germination was sent back to the crib to be livestock food. Those ears that had 90% and above were shelled and this was the seed he planted. The kernels with sprouts that came out of the trays were fed to the chickens.

Larger image















To submit photos, send them to the address in my profile.















Last week's set is seen below, click here to view the entire post.







More discussion and comments on these photos can be found at the newsgroup rec.puzzles.

Thursday, February 10, 2011

Set 375

For first time visitors I recommend this archive for some of my best posts.



2161. 3-1/2" long, take a look at Neatorama for more guesses on this one and a chance to win a T-shirt:

Larger image
























2162.18" long:

Larger image


























2163. 9-1/2" long:

Larger image




Larger image






















2164. Approximately 36" long:

Larger image


























2165. Around 34" long, the edge of the blade is about 1/8" thick:

Larger image
Close-up images





















2166. Approximately 3" long, these unidentified items were photographed in a museum:

Larger image




Larger image






















Answers:



2161. This was made to be used as a bottle opener:

Larger image
























2162.A Pachmayr Gun Works Pistol Case, for holding handguns and ammo, patent number 3,329,278:

Larger image
































2163. An Acme Tie Press, used for pressing neck wear:

Larger image


This isn't a U.S. patent number:





















2164. A cattle prod:

Larger image


























2165. A Hawsing Iron, it is a caulking tool that was used for ship building and repair:

Larger image
Close-up images





















2166. No answer yet for these devices:

Larger image




Larger image













To submit photos, send them to the address in my profile.















Last week's set is seen below, click here to view the entire post.








More discussion and comments on these photos can be found at the newsgroup rec.puzzles.

Thursday, February 3, 2011

Set 374

For first time visitors I recommend this archive for some of my best posts.



2155. 11" tall, take a look at Neatorama for more guesses on this item and a chance to win a T-shirt:


























2156.7-1/2" long:

Larger image


























2157. Approximately 24" wide:

Larger image






















2158. This was submitted by a visitor:

Larger image


























2159. 6" long, this tool was sent in by a visitor who is looking to find its purpose:

More images





















2160. Around 14" long:

More images
































Answers:



2155. A Heavy Metal Nutcracker:


























2156. A timber scribe, also called a race knife, rase knife, timber groover, marking iron, and gaugers' marking iron, it was used to cut letters and numbers into the end of a log. More examples of them can be seen on this page.

Larger image


























2157. A drum or barrel lifter:

Larger image






















2158. This was part of a Qantas QF32 A380 turbine that disintegrated when climbing after takeoff from Singapore on November 4, 2010:

Larger image


























2159. A Krone type impact tool, also called a punch down tool, and insertion tool, according to the link:
1.Can be used on shielded or unshielded twisted pair cables to 110 / keystone jacks
2.Patch panels or outlets
2.Makes network installation easy
3.Blades precisely insert
4.Durable punch down tool


More images





















2160. A tool for working with tire chain, it can be used to cut, open, and close links, patent number 1,069,041:

More images













To submit photos, send them to the address in my profile.















Last week's set is seen below, click here to view the entire post.








More discussion and comments on these photos can be found at the newsgroup rec.puzzles.