Friday, November 29, 2013

Set 521

For first time visitors I recommend this archive for some of my best posts.





3037. 4" long:

Larger image



















3038. About 9" long:

Larger image


























3039. Sent in by a visitor:



































3040. Approximately 12" long:





Larger image
































3041. 12-1/2" long, take a look at Neatorama for more guesses and a chance to win a T-shirt.

Larger image




Larger image








































3042. The idea here is to describe the purpose of the small end of these hammers:

Larger image



Larger image


















Answers:


3037. A Bottle Opener with a magnet to hold the cap:

Larger image

















3038. A double Derringer movie prop with a mechanism that allowed it be concealed under a coat sleeve and then produced instantly when the catch was released. This device was used in the film Maverick.

Larger image






















3039. This is probably a bushing from a transformer or switchgear:





























3040. A Coolerator ice cube cutter, when filled with hot water it could melt into a block of ice to create cubes, patent number 2,127,262:

Larger image








Larger image

























3041. This is an ice pick with a retainer for removing cubes that had been formed on a block of ice by a Coolerator ice cube cutter, patent number 2,070,773:

Larger image
































3042. According to the owner, "These steel hammers are made in an English Warrington pattern. The narrow end was used to start a nail in a tight spot or when using a short nail. It can strike the nail between the fingers to start it without injuring the fingers."

Larger image



Larger image








Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.























To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.













Last week's set is seen below, click here to view the entire post.

Check out Neatorama for lots of funny T-shirts.







More discussion and comments on these photos can be found at the newsgroup rec.puzzles.

Thursday, November 21, 2013

Set 520

For first time visitors I recommend this archive for some of my best posts.





Since Thursday is a holiday, my next post is scheduled for Friday, November 29.






3031. 3-1/2" tall:

Larger image



















3032. 5" long, take a look at Neatorama for more guesses and a chance to win a T-shirt.



























3033. Around 5" long:





























3034. Sent in by a visitor who would like to find the purpose of these items:

Larger image




























3035. Around 10" long:













































3036. This is something that most people have seen before:

Larger image


















Answers:


3031. A World War II OSS issue sheet metal style caltrop, these were thrown from planes and were made to be used in sandy areas to puncture the tires of military vehicles.

Larger image



















3032. This is a dental tooth key for use by a dentist to remove a tooth:



























3033. A 37P-4 glideslope antenna for providing guidance to a landing aircraft:





























3034. No answer yet for these two:

Larger image




























3035. A Berrian gold and silver counterfeit coin detector, the length of this tool has been calibrated so that when the coin is placed in the appropriate slot, the device will tip over. If the coin does not tip the device then it is below the weight required. Patent number 187,936








Larger image



Larger image








































3036. This is a close-up view of the aluminum tip at the top of the Washington Monument:

Larger image









Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.























To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.













Last week's set is seen below, click here to view the entire post.









More discussion and comments on these photos can be found at the newsgroup rec.puzzles.

Thursday, November 14, 2013

Set 519

For first time visitors I recommend this archive for some of my best posts.





3025. Approximately 12" long:

Larger image



Larger image
























3026. 4" long:

Larger image

























3027. Around 6-1/2" long, take a look at Neatorama for more guesses and a chance to win a T-shirt.

Larger image



























3028. 7" long:

Larger image






























3029. 6" tall:

Larger image



Larger image







































3030. About 16" long:





Larger image

















Answers:



3025. This is a braille slate for use with a stylus by blind persons to write text that they can read without assistance:

Larger image

















3026. A cut-away view of an automatic lawn sprinkler:

Larger image























3027. This tool is for cutting off the top of the shell of a soft boiled egg:

Larger image
























3028. This is a flooring clamp, patent number 201,709:

Larger image




























3029. This is a Shapleigh Hardware vibrator that was probably part of the ignition system for an old Model T Ford:

Larger image



Larger image







































3030. A crossbow winder or cranequin, the two hooks pull back the bow string when the handle is turned:





Larger image














Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.























To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.













Last week's set is seen below, click here to view the entire post.









More discussion and comments on these photos can be found at the newsgroup rec.puzzles.