1873. Approximately 3-1/2" long:
Larger image
1874. 9" long:
Larger image
1875. This device was sent in by a visitor who is looking to identify it:
Larger image
Larger image
Close-up of the name plate
1876. About 11" long, take a look at Neatorama for more guesses on this one and a chance to win a T-shirt:
Larger image
1877. The idea here is to describe who would have used these items, the tool at the top is 11" long:
Larger image
1878. Around 30" diameter:
Larger image
Answers:
1873. A watchmaker's uprighting tool for setting up escapements in full plate watches, made by Hardinge Bros., Chicago, Illinois.
Larger image
1874. An Alaska Ice Chipper:
Larger image
1875. Someone sent me the answer for this one, it's a device that monitors the ticking of a watch so you can adjust it quickly, for use at a watch shop or factory. You put the watch on the holders and the electrical apparatus keeps time and determines whether the watch is ticking fast or slow. This way you don't have to take a day or week trying to adjust it.
Larger image
1876. An anti-theft automobile wheel lock, it was attached to one of the old spoke tires, patent number D57,729.
Larger image
1877. These are all safecracker's tools that were confiscated by the police in the early 1900s. According to this site:
For gunpowder (black powder) to be charged into a mechanism such as this would require that a hole be drilled through the door plate. This would have been done using either a belly brace or a ratchet drill.The two tools at the top of the photo are for blowing black powder into the keyhole or drilled hole, the item with the lens is some type of light, not sure what the device at the bottom left is for, looks to be some kind of heater.
This was not always necessary however as in the early days the keylocks were capacious enough to accept enough black powder, which, being detonated in such a confined space could remove the lock cap and bolt allowing the boltwork to be withdrawn.
Larger image
1878. A Sound Dome by Brown Innovations, if you stand under it you can hear the audio but if you step a few feet away you will notice that the sound does not travel far, these are typically used in museums with video presentation or other displays.
Larger image
To submit photos, send them to the address in my profile.
Last week's set is seen below, click here to view the entire post.
Black Ops Pro Tips
More discussion and comments on these photos can be found at the newsgroup rec.puzzles.
1878
ReplyDeleteA directional speaker, a sound dome
http://www.browninnovations.com/soloinaction1.html
1873. Drafting tool, perhaps for drawing adjustable parallel lines.
ReplyDelete1874: An ice-chipper?
ReplyDelete1877: The combination of equipment for drilling and for handling liquids suggests it's a safe-breaker's outfit.
1876 - An "anti theft" tire lock for earlier automobiles.
ReplyDelete1874 - Ice Pick
ReplyDelete1876 - Auto anti theft device
1778 - Overhead Speaker - museum
>1877: The combination of equipment >for drilling and for handling >liquids suggests it's a
ReplyDelete>safe-breaker's outfit.
Safe-breaker's tools is correct, though I don't think the two tools at the top are for liquid.
1874 - Could be a belt or webbing stretcher.
ReplyDelete1873: A stand for small objects being painted or displayed.
ReplyDelete1874: Obviously for putting a row of four small holes in something hard. Probably a can containing fertilizer, salt, milk, or something else being poured out.
1875. A stand for holding stone being chiseled.
1877: A safe-cracker's kit.
1876: Keeps cattle from rubbing up against fence posts.
1878: Ø already got it.